National Changhua University of Education Institutional Repository : Item 987654321/10268
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 6507/11669
造訪人次 : 30786118      線上人數 : 275
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 進階搜尋


題名: Design of Stepped-Impedance Hairpins Band-Pass Filter with Wide Stopband Performance
作者: Ho, Min-Hua;Lin, Wei-Chen
貢獻者: 電子工程學系
關鍵詞: Stepped-impedance hairpin;Microstrip;BPF;Wide stopband;WLAN
日期: 2010-06
上傳時間: 2012-05-22T06:25:53Z
出版者: Wiley
摘要: In this article, the band-pass filter (BPF) of stepped-impedance hairpin (SIH) design having a very wide stopband performance was proposed.The filter composed of two SIHs connected by a narrow bended microstrip with the latter's middle point shorting to the ground through a via hole. A long narrow coupled microstrip was used to couple I/O signal to/from the SIH resonators. The filter operated at a quarter-wavelength resonance condition was built for WLAN IEEE 802.11b/g (2.4/2.45 GHz) applications. The filter's upper stopband had its frequency range measured from 2.76 to 23.08 GHz with the criterion of the signal rejection levels greater than 20 dB. The stopband's upper-end is over 9.5 f0 (with central frequency, f0 = 2.44 GHz). Experiment was conducted for the circuit validation and a good agreement was observed between the measurement and simulation.
關聯: Microwave and Optical Technology Lett., 52(6): 1405-1408
顯示於類別:[電子工程學系] 期刊論文


檔案 大小格式瀏覽次數



DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋