National Changhua University of Education Institutional Repository : Item 987654321/10845
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 30042755      在线人数 : 589
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/10845

题名: Vibration Monitoring of Motorized Spindles Using Spectral Analysis Techniques
作者: Chang, Ching-Feng;Chen, Jin-Jia
贡献者: 電機工程學系
关键词: HSM;Motorized spindle;Spectral analysis techniques;Vibration
日期: 2009-08
上传时间: 2012-06-04T08:35:21Z
出版者: Elsevier Ltd
摘要: High speed machining (HSM) technology is used in a broad range of applications to machine ferrous metals and nonmetallic material. The motorized spindle is one of the major elements to keep the machine running at high productivity. Though the motorized spindle will generate high power and torque at high speed, high removable rate, but the thermal characteristics are more dynamical, speed-dependent and non-linear. The air gap between rotor and stator changes with speed and time, the expansion of rotor, the highly complicated mechanical coupling as well as interface of the mechanical structure. All these factors create centrifugal force to the rotating bearings which not only heat these bearings up, causing bad tolerance, but also create the vibration problem. The worse situation may cause the bearings choked.

In this paper, a piezo transducer is used to check the spindle vibration. Once the spindle is out of balance, the transducer gives a dialog response to computerized numerical controller (CNC) which is set with a control level. Based on ISO standard, 2 mm/s is the max acceptable vibration and designed in accordance with 2 V output voltage. Any higher voltage will enable the CNC shut down the spindle before the bearings are damaged. This new concept will prevent spindle from turning dead. As a result, the spectral analysis techniques can record the condition of spindle rotation even under the condition of misoperation.
關聯: Mechatronics, 19(5): 726-734
显示于类别:[電機工程學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML840检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈