National Changhua University of Education Institutional Repository : Item 987654321/11388
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29721732      在线人数 : 361
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/11388

题名: Binding Site Design for The Micro Conductive Bead Assembly in Flip Chip Bonding
作者: Wang, Kerwin;Cheng, Chih-Hung
贡献者: 機電工程學系
关键词: Micro bead;Assembly
日期: 2008-06
上传时间: 2012-06-06T01:43:19Z
出版者: National Cheng Kung University
摘要: This paper presents a high-density assembly technology and design rules of micro-conductive-bead (4-10μm) assembly. The technology uses photoresist as a non-conductive binding adhesive for beads binding. With resolution quality limited only by photolithography, the method can significantly decrease the bonding pad size of up-to-date circuit chips and PCB boards, thus, it can lead to an increased interconnection density and a reduction in cost. Due to the randomized nature of the bead distribution on bonding pads in the process, we also develop a MATLBR based design tool to provide a guideline for the quality control of the assembly process.
關聯: The 4th Asia Pacific Conference on Transducers and Micro/Nano Technologies, National Cheng Kung University, June 22-25, 2008
显示于类别:[機電工程學系] 會議論文

文件中的档案:

档案 大小格式浏览次数
2050101316001.pdf75KbAdobe PDF532检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈