National Changhua University of Education Institutional Repository : Item 987654321/12257
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29713120      在线人数 : 293
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/12257

题名: Effect of Preheating on the Residual Stress in Type 304 Stainless Steel Weldment
作者: Lin, Yi- Cheng;Lee, K. H.
贡献者: 機電工程系
关键词: Preheating;Residual stress;Welding
日期: 1997-01
上传时间: 2012-07-05T07:09:39Z
出版者: Elsevier B.V.
摘要: This study aimed at the investigation of the effect of preheating on the residual stress and metallurgical properties of weldment. In this study, an autogenous gas tungsten arc welding was used on type 304 stainless steel. During welding, the thermal cycles of four locations in the weldment were recorded to investigate the behavior of thermal stress and residual stress. The residual stresses were determined by using the hole-drilling method of ASTM standard E837. The metallurgical properties were examined by using the optical microscope and Vickers hardness tester. The experimental results show that there are two factors influencing the formation of welding residual stress in preheat process: the elevation of welding equilibrium temperature and the increase of amount of heat input. The cumulative effects result in the welding residual stress not being improved significantly with preheating. The residual stress increases with the increase of preheat temperature. Preheating will induce a wider heat-affected zone and a poorer strength base metal than the conventional welding in type 304 stainless steel.
關聯: Journal of Material Processing Technology, 63(1-3): 797-801
显示于类别:[機電工程學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML753检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈