National Changhua University of Education Institutional Repository : Item 987654321/12258
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29963934      在线人数 : 334
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/12258

题名: Effect of Welding Parameters on the Residual Stress by the Parallel Heat Welding
作者: Lin, Yi- Cheng;Lee, K. H.
贡献者: 機電工程系
日期: 1997-04
上传时间: 2012-07-05T07:09:41Z
出版者: Elsevier B.V.
摘要: The aim of this study was to investigate the effect of welding parameters on the magnitude of residual stress and metallurgical properties produced by parallel heat welding (PHW) by using autogenous gas tungsten arc welding on type 304 stainless steel. During such welding, the thermal cycles of four locations in the weldment were recorded to investigate the action of thermal stress. The metallurgical properties were examined by using the optical microscope and Vickers hardness tester. Based on the setup of heating torches behind the welding torch during PHW, it was found that the residual stress increases with the increase of heating temperature and width of heating torches. The PHW process does not increase the width of the heat affected zone (HAZ) nor the tendency of grain coarsening. The width of the HAZ and the hardness distribution are not significantly changed from various heating conditions in type 304 stainless steel weldment.
關聯: International Journal of Pressure Vessels and Piping, 71(2): 197-202
显示于类别:[機電工程學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML667检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈