Loading...
|
Please use this identifier to cite or link to this item:
http://ir.ncue.edu.tw/ir/handle/987654321/12285
|
| Title: | Optical and electrical characteristics of Al-doped ZnO thin films prepared by aqueous phase deposition |
| Authors: | Yao, Pin-Chuan;Hang, Shih-Tse;Lin, Yu-Shuan;Yen, Wen-Tsai;Lin, Yi- Cheng |
| Contributors: | 機電工程系 |
| Keywords: | AZO;Thin film;Precursor chemistry;Aqueous phase deposition |
| Date: | 2010-12
|
| Issue Date: | 2012-07-05T07:11:11Z
|
| Publisher: | Elsevier B.V. |
| Abstract: | Transparent conducting Al-doped ZnO (AZO) thin films have been deposited by sol–gel route. Starting from an aqueous solution of zinc acetate by adding aluminum chloride as dopant, a c-axis oriented polycrystalline ZnO thin film 100 nm in thickness could be spin-coated on glass substrates via a two-step annealing process under reducing atmosphere. The effects of thermal annealing and dopant concentration on the structural, electrical and optical properties of AZO thin films were investigated. The post-treated AZO films exhibited a homogenous dense microstructure with grain sizes less than 10 nm as characterized by SEM photographs. The annealing atmosphere has prominent impact on the crystallinity of the films which will in turn influence the electrical conductivity. By varying the doping concentrations, the optical and electrical properties could be further adjusted. An optimal doping concentration of Al/Zn = 2.25 at.% was obtained with minimum resistivity of 9.90 × 10−3 Ω-cm whereas the carrier concentration and mobility was 1.25 × 1020 cm−3 and 5.04 cm2 V−1 s−1, respectively. In this case, the optical transmittance in the visible region is over 90%. |
| Relation: | Applied Surface Science, 257(5): 1441-1448 |
| Appears in Collections: | [機電工程學系] 期刊論文
|
Files in This Item:
| File |
Size | Format | |
|---|
| index.html | 0Kb | HTML | 623 | View/Open |
|
All items in NCUEIR are protected by copyright, with all rights reserved.
|
