National Changhua University of Education Institutional Repository : Item 987654321/12310
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6487/11649
造访人次 : 28507998      在线人数 : 397
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻


题名: Fabrication of components for a valve-less micropump or microejector by multilevel electroforming technology
作者: Chen, Shih-Chang;Cheng, Chiang-Ho;Lin, Yi- Cheng
贡献者: 機電工程系
日期: 2005-06
上传时间: 2012-07-05T07:13:41Z
摘要: Both the workable micropump and microejector actuated by the shear mode PZT actuators are successfully fabricated. They are based on a similar design and the same process that uses UV-LIGA multi-level electroforming technology. The micropump consists of a vibration plate and a chamber plate while the microejector consists of the same vibration plate and a nozzle plate. The AZ 9260 positive photoresist is used as the electroforming mould. The two alternating steps, the photoresist patterning and nickel electroforming, make components form a quasi 3-D (or 2.5-D) multilevel microstructure. An over-electroforming technique is employed to form the nozzles in nozzle plate for the microejector.
Some useful experimental data about the over-electroforming is proposed to predict and control the orifice diameter. The volume change of the chamber is estimated by both the numerical solution and actual measurement. The liquid ejection of the microejector is observed by a visualization system.
關聯: 6th High Aspect Ratio Micro Structure Technology Workshop (HARMST 2005), Gyeongju, Korea, June 10-13, 2005: 59-60
显示于类别:[機電工程學系] 會議論文


档案 大小格式浏览次数
2050100216007.pdf84KbAdobe PDF621检视/开启



DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈