National Changhua University of Education Institutional Repository : Item 987654321/13358
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 30060527      在线人数 : 549
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13358

题名: Rigid-plastic finite element simulation of deformation mechanisms during rolling of complex sheets containing an inclusion
作者: Chen, Dyi-Cheng
贡献者: 工業教育與技術學系　
关键词: Complex Sheet Rolling;Defective Inclusion;Finite Element Simulation
日期: 2006-03
上传时间: 2012-08-27T05:49:58Z
摘要: Using rigid-plastic finite element DEFORMTM 2D software, this study simulates the plastic deformation of complex sheets at the roll gap during the sheet rolling process. Specifically, the study addresses the deformation of complex sheets containing inclusion defects. Under various rolling conditions, the present numerical analysis investigates the damage factor distributions, the void length at the front and rear of the inclusion, the deformation mechanisms, and the stress-strain distributions around the inclusion. The relative influences of the thickness reduction, the roll radii, and the friction factors on the void length at the front and rear of the inclusion, respectively, are systematically examined. Additionally, the correlation between the front and rear void lengths and a series of damage factors is explored. The simulation results appear to verify the suitability of the DEFORMTM 2D software for modeling the rolling of complex sheets containing inclusions.
關聯: Key Engineering Materials, 306-308: 483-488
显示于类别:[工業教育與技術學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
2030100610001.pdf8KbAdobe PDF506检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈