National Changhua University of Education Institutional Repository : Item 987654321/13363
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29932680      在线人数 : 444
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13363

题名: Study of titanium alloy sheet during H-sectioned rolling forming using the Taguchi method
作者: Chen, Dyi-Cheng;Gu, Wun-Syuan;Hwang, Yeong-Maw
贡献者: 工業教育與技術學系　
日期: 2007-05
上传时间: 2012-08-27T05:50:43Z
出版者: AIP
摘要: This study employs commercial DEFORMTM three-dimensional finite element code to investigate the plastic deformation behavior of Ti-6Al-4V titanium alloy sheet during the H-sectioned rolling process. The simulations are based on a rigid-plastic model and assume that the upper and lower rolls are rigid bodies and that the temperature rise induced during rolling is sufficiently small that it can be ignored. The effects of the roll profile, the friction factor between the rolls and the titanium alloy, the rolling temperature and the roll radii on the rolling force, the roll torque and the effective strain induced in the rolled product are examined. The Taguchi method is employed to optimize the H-sectioned rolling process parameters. The results confirm the effectiveness of this robust design methodology in optimizing the H-sectioned rolling process parameters for the current Ti-6Al-4V titanium alloy.
關聯: AIP Conf. Proc. --Materials Processing and Design: Modeling, Simulation and Applications, 908: 601-606
显示于类别:[工業教育與技術學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
2030100610003.pdf8KbAdobe PDF476检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈