National Changhua University of Education Institutional Repository : Item 987654321/13370
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 30025711      在线人数 : 457
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13370

题名: Investigation into cold extrusion of aluminum billets using three-dimensional finite element method
作者: Chen, Dyi-Cheng;Syu, Sheng-Kai;Wu, Cing-Hong;Lin, Sin-Kai
贡献者: 工業教育與技術學系　
关键词: Rigid-plastic finite element;Three-dimensional extrusion;Extrusion ratio
日期: 2007-10
上传时间: 2012-08-27T05:52:09Z
出版者: Elsevier B.V
摘要: This paper employs rigid-plastic finite element DEFORM™ 3D software to investigate the plastic deformation behavior of an aluminum billet during its axisymmetric extrusion through a conical die. The die and container are assumed to be rigid bodies and the temperature change induced during extrusion is ignored. Under various extrusion conditions, the present numerical analysis investigates the stress–strain distribution, the damage factor distributions, the die load and the flow velocity of the billet at the exit. The relative influences of the semi-angle of the die, the extrusion ratio and the friction factors are systematically examined. The simulation results confirm the suitability of the current finite element software for modeling the three-dimensional cold extrusion of aluminum billets.
關聯: Journal of Materials Processing Technology, 192-193: 188-193
显示于类别:[工業教育與技術學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML725检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈