National Changhua University of Education Institutional Repository : Item 987654321/13371
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29709473      在线人数 : 424
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13371

题名: Use of Taguchi method to study a robust design for H-sectioned porous beams during rolling
作者: Chen, Dyi-Cheng;Chen, Cheng-Fu
贡献者: 工業教育與技術學系 
关键词: Finite Element (FE);H-Sectioned Beams;Porous;Taguchi Method
日期: 2007-10
上传时间: 2012-08-27T05:52:12Z
出版者: Trans Tech Publications
摘要: Commercial DEFORMTM three-dimensional finite element (FE) code is employed to examine the plastic deformation behavior of porous beams at the roll gap during the H-sectioned rolling process. The simulations assume that the rolls are fully rigid and that the change in temperature induced in the beams during rolling can be ignored. The simulations systematically examine the respective effects of the arc radius of the H-section flange region of the upper and lower rolls, the friction factor between the beam and the rolls, the density of the porous beams and the radii of the upper and lower rolls on the filling ratio at the roll gap, the thickness reduction of the rolled beam in the flange region, and the effective stress and strain distribution induced in the rolled product. The Taguchi method is then employed to optimize the processing parameters for the H-sectioned rolling of porous beams. Overall, the simulation results confirm the effectiveness of the Taguchi design methodology as a means of optimizing the H-sectioned rolling process conditions.
關聯: Materials Science Forum, 561-565(PART 3): 1845-1848
显示于类别:[工業教育與技術學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML521检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈