資料載入中.....
|
請使用永久網址來引用或連結此文件:
http://ir.ncue.edu.tw/ir/handle/987654321/13380
|
| 題名: | 等通道彎角擠製之有限元素分析與模具製作
Finite Element Analysis and Processes of Experimental Die Set of Equal-channel Angular Extrusion |
| 作者: | 陳狄成;潘志軒;張褚峰;李依如;鄒國益 |
| 貢獻者: | 工業教育與技術學系 |
| 關鍵詞: | 等通道彎角擠製;鈦合金;有限元素
Finite element;Titanium alloy;Equal-channel angular extrusion |
| 日期: | 2009-04
|
| 上傳時間: | 2012-08-27T05:53:32Z
|
| 出版者: | 中原大學工學院 |
| 摘要: | 等通道彎角擠製為利用模具幾何形狀、材料性質與加工條件來獲得材料的剪力塑性變形。本文使用剛塑性有限元素 DEFORMTM 2D 軟體研究 Ti-6Al-4V 鈦合金於等通道彎角擠製加工的塑性變形行為，在不同擠製條件下，包含模具轉彎之夾角與摩擦因子等，以分析胚料等通道彎角擠製後之破壞因子 (damage) 分佈、有效應力與應變分佈等。最後設計兩組 (φ =90º 和φ =120º) 等通道彎角實驗模具來驗證之。
The shear plastic deformation behavior of a material during equal-channel angular extrusion (ECAE) is governed primarily by the die geometry, the material properties, and the process conditions. This paper employs the rigid-plastic finite element (FE) DEFORM(superscript TM) 2D software to investigate the plastic deformation behavior of Ti-6Al-4V titanium alloy during ECAE processing. Under various ECAE conditions, the FE analysis investigates the damage factor distribution and the effective stress-strain distribution. The relative influences of the internal angle between the two die channels and the friction factors are systematically examined. Finally, two sets of mold and die (including φ=90º and φ=120º) for ECAE are designed to compare the simulated data. |
| 關聯: | 先進工程學刊, 4(2): 133-139 |
| 顯示於類別: | [工業教育與技術學系] 期刊論文
|
文件中的檔案:
| 檔案 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | 0Kb | HTML | 604 | 檢視/開啟 |
|
在NCUEIR中所有的資料項目都受到原著作權保護.
|
