National Changhua University of Education Institutional Repository : Item 987654321/13382
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 30015926      在线人数 : 424
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13382

题名: Finite element simulation on high extrusion-ratio hydrostatic extrusion of porous material
作者: Chen, Dyi-Cheng;You, Ci-Syong
贡献者: 工業教育與技術學系　
日期: 2009-06
上传时间: 2012-08-27T05:53:36Z
出版者: Springer Berlin
摘要: This study employs commercial rigid-plastic finite element (FE) DEFORMTM 2D software to investigate the plastic deformation behavior of porous billets during their high extrusion-ratio axisymmetric hydrostatic extrusion through conical dies. The FE analyses assume the container, ram, and die to be rigid bodies and ignore the deformation-induced temperature rise which occurs within the billet during the extrusion process. The numerical analyses investigate the respective effects of the semi-angle of the conical die, the initial density of the porous billet, the extrusion ratio, and the initial diameter of the billet on the damage, effective strain, effective stress, and radial load induced within the extruded billet. The simulation results confirm the suitability of the DEFORMTM 2D software for modeling the high extrusion-ratio hydrostatic extrusion of porous billets.
關聯: The Arabian Journal for Science and Engineering, 34(1C): 11-19
显示于类别:[工業教育與技術學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML615检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈