English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 6507/11669
造訪人次 : 29717138      線上人數 : 391
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 進階搜尋

請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13407

題名: 缺陷空孔桿件於擠製加工之研究
An Investigation of Void Defect in Rod Extrusion
作者: 陳狄成
貢獻者: 工業教育與技術學系 
關鍵詞: Finite element;Axisymmetric extrusion;Defective void
日期: 2005-10
上傳時間: 2012-08-27T05:55:47Z
出版者: 中國機械工程學會
摘要: 本文使用剛塑性有限元素模擬軟體DEFORM 2D研究單層桿穿過圓錐形模具之軸對稱擠製加工。本研究進行一系列的模擬分析,其模擬擠製條件包含模具入口半模角、缺陷孔直徑大小、摩擦因子等,預測擠製過程中缺陷單層桿之破壞因子分布、空孔尺寸變化和平均垂直應力分布等。模擬分析結果希望能確認有限元素軟體對缺陷單層桿擠製過程之適用性。
This paper employs rigid-plastic finite element DEFORM 2D software to investigate the plastic deformation behavior of a single rod during its axisymmetric extrusion through a conical die. Under various extrusion conditions, the present numerical analysis investigates the damage factor distributions, the variation of the void dimension at the exit, the deformation mechanisms, and the mean stress distributions around the defective void. The relative influences of the semi-angle of the die, the diameter of the initial void, and the friction factors, respectively, are systematically examined. Additionally, the correlations between the before and after extrusion for defective void and a series of damage factors are explored. The simulation results verify the suitability of the current finite element software for modeling the extrusion of single rods containing internal voids.
關聯: Proceedings of the 9th Asian Symposium on Precision Forging (9th ASPF 2005), 2005年10月2-4日: 479-484
顯示於類別:[工業教育與技術學系] 會議論文

文件中的檔案:

檔案 大小格式瀏覽次數
2030100616002.pdf52KbAdobe PDF350檢視/開啟


在NCUEIR中所有的資料項目都受到原著作權保護.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋