National Changhua University of Education Institutional Repository : Item 987654321/13425
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29714438      在线人数 : 389
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13425

题名: Design of Titanium Alloy Equal Channel Angular Extrusion Process Using Taguchi Method
作者: Chen, Dyi-Cheng;Li, Yi-Ju;Tzou, Gow-Yi
贡献者: 工業教育與技術學系 
关键词: Finite element;Titanium alloy;Equal channel angular extrusion;Taguchi method
日期: 2006-12
上传时间: 2012-08-27T05:57:23Z
出版者: 中華民國力學學會;大葉大學
摘要: The shear plastic deformation behavior of a material during equal channel angular (ECA) extrusion is governed primarily by the die geometry, the material properties, and the process conditions. This paper employs the rigid-plastic finite element (FE) DEFORMTM 2D software to investigate the plastic deformation behavior of Ti-6Al-4V titanium alloy during ECA extrusion processing. Under various ECA extrusion conditions, the FE analysis investigates the damage factor distribution, the effective stress-strain distribution, and the die load at the exit. The relative influences of the internal angle between the two die channels, the friction factors, the titanium alloy temperature and the strain rate of billet are systematically examined. In addition, the Taguchi method is employed to optimize the ECA process parameters. The results have shown that: (1) the internal angle between the two die channels, the friction factor, the temperature of the Ti-6Al-4V titanium alloy, and the strain rate applied by the ram all have a significant effect upon the Y-load of the ECA extruded product; (2) the maximum damage value occurs in the surface region of the billet in the outer die channel; and (3) the maximum effective stress occurs in the vicinity of the corner of the outer die channel. The simulation results confirm the effectiveness of the Taguchi robust design methodology in optimizing the ECA extrusion process for the current Ti-6Al-4V titanium alloy.
關聯: Proceedings of the 30th National Conference on Theoretical and Applied Mechanics, 大葉大學, 2006年12月15-16日
显示于类别:[工業教育與技術學系] 會議論文

文件中的档案:

档案 大小格式浏览次数
2030100616007.pdf36KbAdobe PDF489检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈