National Changhua University of Education Institutional Repository : Item 987654321/13445
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 30007114      在线人数 : 384
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/13445

题名: Finite element analysis of double layers alloy wire drawing processes
作者: Chen, Dyi-Cheng;Guo, Zih-Yin;Wang, Shu-Jhao
贡献者: 工業教育與技術學系　
关键词: Wire drawing process;Finite element;Aluminum-copper alloy wire
日期: 2008-04
上传时间: 2012-08-27T06:01:22Z
出版者: Springer
摘要: This paper employs rigid-plastic finite element (FE) DEFORMTM 2D software to investigate the plastic deformation behavior of a composite aluminum-copper alloy wire as it is drawn through a conical die. The FE simulations focus specifically on the respective effects of the die semi-cone angle, the friction factor and the core diameter of the drawn wire on the die load, the diameter ratio of the composite wire at the die exit, and the fracture, damage factor and effective strain distributions. The simulation results confirm the suitability of the DEFORMTM 2D software for analyzing the drawing of composite aluminum-copper alloy wire.
關聯: Int J Mater Form Suppl, 1: 415-418
显示于类别:[工業教育與技術學系] 會議論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML682检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈