National Changhua University of Education Institutional Repository : Item 987654321/15783
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29941700      在线人数 : 479
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/15783

题名: Electron Beam Lithography of Microbowtie Structures for Next-generation Optical Probe
作者: Tseng, Ampere A.;Chen, Chii D.;Wu, Cen-Shawn;Diaz, Rodolfo E.;Watts, Michael E.
贡献者: 物理學系
关键词: Electron-beam lithography;Microbowtie;Microfabrication;Micro/Nano;Inspection;Optical probe
日期: 2002
上传时间: 2013-03-12T04:05:58Z
出版者: Society of Photo-Optical Instrumentation Engineers
摘要: The development of microbowtie structures for a next-generation optical probe called the Wave Interrogated Near-Field Array (WINFA) is presented. The WINFA combines the sensitivity of near-field detection with the speed of optical scanning. The microbowties are designed to act as resonant elements to provide spatial resolution well below the diffraction limit with a transmission efficiency approaching unity. Following an introduction of the concept and background information, the design of the microbowtie is presented. A numerical electromagnetic scattering model is developed and used for better designs of the bowtie structures. The electron-beam lithography process is then used to fabricate the final designed bowties structure. Special fabrication procedures have been developed to cope with the charge dissipation problem that arises when lithographing an insulating substrate as is required in the present probe design. Two types of substrates and two types of resists are considered in the present study. The fabricated microstructures have 40 nm bowtie gaps that are more than 200 000 times smaller than the one built previously. All fabricated bowtie microstructures are examined and the results are compared. It has been found that, in addition to the relative ease in fabrication, the bowties on indium–tin–oxide coated glass substrate can not only minimize the charge accumulation in a glass substrate, but also satisfy the functional requirement of optical transparency to the incident wave. Recommendations for making a bowtie structure in the even smaller bowtie array are also included.
關聯: Journal of Microlithography, Microfabrication, and Microsystems, 1(2): 123-135
显示于类别:[物理學系] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML586检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈