National Changhua University of Education Institutional Repository : Item 987654321/15788
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 6491/11663
造訪人次 : 24647563      線上人數 : 47
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 進階搜尋


題名: Fabrication of Microbowtie Structures for Optical Probing of Nanoscale Objects
作者: Tseng, A. A.;Diaz, R. E.;Chen, C. D.;Wu, Cen-Shawn
貢獻者: 物理學系
日期: 2003-05
上傳時間: 2013-03-12T04:06:06Z
出版者: SpringerLink
摘要: A microbowtie array critical to a newly proposed
optical probe is studied. The optical probe is used for
high-speed detection of nanoscale objects. Based on the
concept of Wave Interrogated Near Field Array (WINFA),
an array of microbowtie structures acts as a detector in
amplifying the incident light source to overcome the difficulties
of the conventional optical probe that are limited
by the diffraction limits of the optical light. In the present
study, the micro bowties are fabricated by an electron
beam lithography technique. The paper begins with an
introduction of the probe concept and then the design
considerations are given followed by the fabrication procedure
and results. Two different substrates are considered
to study the charge accumulation problem caused by an
insulating substrate, required by the probe. Results indicate
that the bowtie structure with an indium-tin-oxide
coated glass substrate can minimize the charge accumulation
problem, making it a suitable substrate for the
bowtie structures considered. The paper concludes with
recommendations for making even smaller nano-sized
bowtie structures.
關聯: Microsystem Technologies, 9(5): 335-339
顯示於類別:[物理學系] 期刊論文


檔案 大小格式瀏覽次數



DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋