National Changhua University of Education Institutional Repository : Item 987654321/17933
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29715991      在线人数 : 396
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/17933

题名: Meshing Analysis of a Gear with a Ring-Involute Gear
作者: Yang, Shyue-Cheng
贡献者: 車輛科技研究所
关键词: Gear;Ring-involute teeth
日期: 2003-01
上传时间: 2014-01-15T04:19:04Z
出版者: SAGE
摘要: The surface of a gear with ring-involute teeth generated by a rack cutter with ring-involute teeth is a new type of gear. This paper describes a method developed from gear theory for deriving a pinion and a gear with ring-involute teeth. A gear with ring-involute teeth is regarded as an envelope to the family of rack cutter surfaces when the pinion and gear rotate for a cycle. Using a developed mathematical model, the investigation on the undercutting analysis of the proposed gear is studied. Here the kinematic errors are investigated according to the obtained geometric modelling of the designed gear meshing when assembly errors were present. Stress analysis for the proposed gear was performed. Finally, a numerical example is presented to demonstrate the geometric model of a gear with ring-involute teeth and a gear ratio of 3:2.
關聯: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217(12): 1287-1299
显示于类别:[車輛科技研究所] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML512检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈