National Changhua University of Education Institutional Repository : Item 987654321/17935
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6498/11670
造访人次 : 25696107      在线人数 : 106
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/17935

题名: A Mathematical Model of a cc-type Single-Screw Compressor
作者: Yang, Shyue-Cheng
贡献者: 車輛科技研究所
关键词: Inverse envelope;Single-screw compressor
日期: 2004
上传时间: 2014-01-15T04:19:16Z
出版者: SAGE
摘要: In this paper, a method is proposed for determining a basic profile of a cc-type single-screw compressor including the gate rotor and the screw rotor. The cc-type has a cylindrical screw and two cylindrical gate rotors. Based on this method, a mathematical model of the meshing principles of a cc-type screw rotor meshed with a gate rotor, that has either straight edge teeth or conical teeth, is presented. The inverse envelope concept is used to determine the cutting-edge curve of a gate rotor. Based on this concept, the required cutter for machining a cc-type screw rotor can be obtained by the envelope of a one-parameter family. The obtained screw rotor is an envelope to the family of the gate rotor's surfaces. The obtained envelope becomes the generating surface. The inverse envelope can be used to obtain the envelope to the family of generating surfaces. Then the profile of a gate rotor cutting-edge curve can be easily obtained. The surface analysis including contact lines is shown for the design and manufacture of a screw compressor. As an example, the cc-type single-screw compressor with a compressor ratio of 11:6 was determined with the aid of the proposed mathematical model. Using rapid prototyping (RP) and manufacturing technology, a cc-type single-screw rotor with a gate rotor was designed. The RP primitives provide an actual full-size physical model that can be analysed and used for further development. Results from these mathematical models should have applications in the design of cc-type single-screw compressors.
關聯: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 218(4): 437-448
显示于类别:[車輛科技研究所] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML476检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈