資料載入中.....
|
請使用永久網址來引用或連結此文件:
http://ir.ncue.edu.tw/ir/handle/987654321/17943
|
題名: | Profile Generation and Analysis for a pp-type Single-Screw Compressor |
作者: | Yang, Shyue-Cheng |
貢獻者: | 車輛科技研究所 |
關鍵詞: | pp-Type;Single-screw compressor |
日期: | 2006-09
|
上傳時間: | 2014-01-15T04:19:21Z
|
出版者: | Springer-Verlag |
摘要: | The precision design of the screw rotor and the gate rotor is the foundation to promoting the operational reliability of a pp-type single-screw compressor. The purpose of the present paper is to determine the mathematical model of a single-screw rotor with conical gate rotors. A simple method by gear theory to determine the profiles of a screw rotor and a gate rotor have been studied. The mathematical model of the screw rotor is defined as the envelope to the family of gate rotor surfaces. As an example, the pp-type single-screw compressor for a compressor ratio of 11:6 is demonstrated with the aid of the proposed mathematical model. Based on the developed geometrical models, the contour of von Mises stress distributions of a screw rotor and four gate rotors on the proposed mechanism is presented. Using rapid prototyping (RP) and manufacturing technology, the proposed pp-type single-screw compressor with conical teeth of a gate rotor was designed. The RP primitives provide an actual full-size physical model that can be analyzed and used for further development. The results from these mathematical models should have practical applications in the design of pp-type single-screw mechanisms. |
關聯: | International Journal of Advanced Manufacturing Technology, 30(9-10): 789-796 |
顯示於類別: | [車輛科技研究所] 期刊論文
|
文件中的檔案:
檔案 |
大小 | 格式 | 瀏覽次數 |
index.html | 0Kb | HTML | 481 | 檢視/開啟 |
|
在NCUEIR中所有的資料項目都受到原著作權保護.
|