資料載入中.....
|
請使用永久網址來引用或連結此文件:
http://ir.ncue.edu.tw/ir/handle/987654321/17946
|
| 題名: | A Study of an Elbow Mechanism Generated by a Conical Cutter |
| 作者: | Yang, Shyue-Cheng |
| 貢獻者: | 車輛科技研究所 |
| 關鍵詞: | Elbow mechanism;Spherical gear |
| 日期: | 2007-06
|
| 上傳時間: | 2014-01-15T04:19:23Z
|
| 出版者: | SAGE |
| 摘要: | This paper presents a method for determining the mathematical model of an elbow mechanism with a convex tooth and a concave tooth. Based on this method, the mathematical model presents the meshing principles of a conical cutter meshed with a tooth that is either convex or concave. Using the developed mathematical models and the tooth contact analysis, kinematic errors are investigated according to the obtained geometric modelling of the designed gear meshing when assembly errors are present. The influence of misalignment on kinematic errors has been investigated. The goal of the current study is to investigate von-Mises stress for three teeth contact pairs. A structural load is assumed to act on a gear of the proposed mechanism. The von-Mises of the proposed gear is determined. The conical cutter used in the design and manufacture of the convex and concave gear is shown. For example, the proposed mechanism with a transmission ratio of 3:2 was determined with the aid of the proposed mathematical model. Using rapid prototyping and manufacturing technology, an elbow mechanism with a convex gear, a concave gear and a frame was designed. The RP primitives provide an actual full-size physical model that can be analysed and used for further development. Results from these mathematical models are applicable to the design of an elbow mechanism. |
| 關聯: | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 221(6): 727-738 |
| 顯示於類別: | [車輛科技研究所] 期刊論文
|
文件中的檔案:
| 檔案 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | 0Kb | HTML | 474 | 檢視/開啟 |
|
在NCUEIR中所有的資料項目都受到原著作權保護.
|
