National Changhua University of Education Institutional Repository : Item 987654321/17950
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 29714824      在线人数 : 407
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/17950

题名: Modeling and Manufacturing of PP-type Single Screw Compressor
作者: Yang, Shyue-Cheng;Liang, Tsang-Lang
贡献者: 車輛科技研究所
日期: 2007
上传时间: 2014-01-15T04:19:25Z
出版者: Canadian Society for Mechanical Engineering
摘要: A geometric model and a mathematical model of a PP-type single screw rotor with planar gate rotor are derived from the gate-rotor generation process and gear theory. The teeth of gate rotor are planar. Based on the inverse envelope concept, the cutter required for machining the single screw rotor can be obtained using an inverse envelope of a one-parameter family of screw surfaces. The surface of the proposed screw rotor is analyzed using the developed mathematical model. A surface analysis, including stress analysis, of the design and manufacture of the screw compressor is presented. Finally, a numerical example demonstrates the geometric model of the PP-type single screw rotor with a compression ratio of 11:6.
關聯: Transactions of the Canadian Society for Mechanical Engineering, 31(2): 219-234
显示于类别:[車輛科技研究所] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML524检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 


DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈