National Changhua University of Education Institutional Repository : Item 987654321/17956
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6507/11669
造访人次 : 30019166      在线人数 : 286
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/17956

题名: Geometry and Simulation of the Generation of Cylindrical Gears by an Imaginary Disc Cutter
作者: Yang, Shyue-Cheng;Liang, Tsang-Lang
贡献者: 車輛科技研究所
关键词: Gears;Disc cutter
日期: 2009
上传时间: 2014-01-15T04:19:29Z
出版者: Canadian Society for Mechanical Engineering
摘要: This paper proposed a method of representing the geometry of an imaginary disc cutter in parameter form. The undercutting condition of the imaginary disc cutter is studied, and the mathematical model of the generated gears is developed by the undercutting condition of the cutter. Through a mathematical model of the generation process, the vector equations of generated gears are established. According to the proposed method, a planetary gear mechanism and a pair of gear pump with smaller numbers of teeth are illustrated. A cutting simulation process is presented for machining the proposed gear pairs. Stress analysis for the proposed gear mechanism is performed. Finally, the proposed method is applied to determine singular points of the proposed disc cutter.
關聯: Transactions of the Canadian Society for Mechanical Engineering, 33(3): 411-428
显示于类别:[車輛科技研究所] 期刊論文

文件中的档案:

档案 大小格式浏览次数
index.html0KbHTML584检视/开启


在NCUEIR中所有的数据项都受到原著作权保护.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈