National Changhua University of Education Institutional Repository : Item 987654321/17957
English  |  正體中文  |  简体中文  |  全文笔数/总笔数 : 6498/11670
造访人次 : 25695819      在线人数 : 105
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜寻范围 进阶搜寻


题名: Mathematical Model of a Stepped Triple Circular-arc Gear
作者: Yang, Shyue-Cheng
贡献者: 車輛科技研究所
关键词: Triple circular-arc gear;Imaginary rack cutter
日期: 2009-05
上传时间: 2014-01-15T04:19:30Z
出版者: Elsevier Ltd.
摘要: An imaginary rack cutter with stepped triple circular-arc tooth profile is presented. The concept of stepped triple circular-arc tooth comes from the standard Chinese double circular-arc tooth profile and involute tooth profile. Based on the proposed tooth, a mathematical model of the meshing principles of a gear meshed with a pinion is developed for an imaginary triple circular-arc teeth rack cutter. The developed geometric models of the pinion and the gear are used to investigate the contact stress of stepped triple circular-arc tooth via finite element analysis. A structural load is assumed to act on a pinion of the proposed tooth. The goal of the current study is to investigate the von-Mises stress for one tooth contact pairs. Using the mathematical models developed, variation of the angular velocity is investigated according to the obtained geometric modeling of the designed gear meshing when assembly errors are present. The influence of misalignment on variation of the angular velocity is also been investigated. As an example, a spur gear with a gear ratio of 3:4 is presented.
關聯: Mechanism and Machine Theory, 44(5): 1019-1031
显示于类别:[車輛科技研究所] 期刊論文


档案 大小格式浏览次数



DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回馈