National Changhua University of Education Institutional Repository : Item 987654321/17960
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 6507/11669
造訪人次 : 29953766      線上人數 : 539
RC Version 3.2 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 進階搜尋

請使用永久網址來引用或連結此文件: http://ir.ncue.edu.tw/ir/handle/987654321/17960

題名: A Mathematical Model of a Worm Mechanism Generated by a Conical Cutter
作者: Yang, Shyue-Cheng
貢獻者: 車輛科技研究所
關鍵詞: Worm;Ring-involute tooth;Conical cutter
日期: 2010-08
上傳時間: 2014-01-15T04:19:33Z
出版者: SAGE
摘要: In this article, an imaginary conical cutter was used to determine the geometric models of the worm—gear mechanism including a worm and a gear. Mathematical models of the worm and the gear were derived using an imaginary conical cutter and gear theory. Based on the geometric relations between the worm and conical cutter surfaces and between the gear and conical cutter surfaces, the worm and the gear were regarded as an envelope to the family of conical cutter surfaces when they rotated for one cycle. Using the developed mathematical model, the stress analysis of the proposed mechanism was examined. The results show that the von Mises stress and volume of the proposed worm and gear were smaller than those of the conventional worm—gear mechanism. Lastly, a numerical example was used to illustrate the geometric model of a gear and a worm with a gear ratio of 30:1.
關聯: Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224(8): 1707-1716
顯示於類別:[車輛科技研究所] 期刊論文

文件中的檔案:

檔案 大小格式瀏覽次數
index.html0KbHTML480檢視/開啟


在NCUEIR中所有的資料項目都受到原著作權保護.

 

DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 回饋