資料載入中.....
|
請使用永久網址來引用或連結此文件:
http://ir.ncue.edu.tw/ir/handle/987654321/17933
|
| 題名: | Meshing Analysis of a Gear with a Ring-Involute Gear |
| 作者: | Yang, Shyue-Cheng |
| 貢獻者: | 車輛科技研究所 |
| 關鍵詞: | Gear;Ring-involute teeth |
| 日期: | 2003-01
|
| 上傳時間: | 2014-01-15T04:19:04Z
|
| 出版者: | SAGE |
| 摘要: | The surface of a gear with ring-involute teeth generated by a rack cutter with ring-involute teeth is a new type of gear. This paper describes a method developed from gear theory for deriving a pinion and a gear with ring-involute teeth. A gear with ring-involute teeth is regarded as an envelope to the family of rack cutter surfaces when the pinion and gear rotate for a cycle. Using a developed mathematical model, the investigation on the undercutting analysis of the proposed gear is studied. Here the kinematic errors are investigated according to the obtained geometric modelling of the designed gear meshing when assembly errors were present. Stress analysis for the proposed gear was performed. Finally, a numerical example is presented to demonstrate the geometric model of a gear with ring-involute teeth and a gear ratio of 3:2. |
| 關聯: | Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 217(12): 1287-1299 |
| 顯示於類別: | [車輛科技研究所] 期刊論文
|
文件中的檔案:
| 檔案 |
大小 | 格式 | 瀏覽次數 |
|---|
| index.html | 0Kb | HTML | 522 | 檢視/開啟 |
|
在NCUEIR中所有的資料項目都受到原著作權保護.
|
